Sliding gate operator Hörmann LineaMatic H, up to 800 kg, 24 V

Hörmann LineaMatic H is the most powerful of the LineaMatic sliding gate operators. It is designed for large, heavy entrance gates up to 10 m long and 3 m high, including commercial use. A gate running on wheels can weigh up to 800 kg, a cantilever gate up to 600 kg. The ESE BS receiver and a BiSecur remote are not included and are sold separately – or choose LineaMatic H with safety kit, which includes them.

Our tip: during the first setup (initialisation) of the operator, select the operator type LineaMatic P. This activates the BiSecur receiver built into the control unit, so you will not need the external ESE BS receiver – just add a BiSecur remote control. Menu items 11–16 then appear, where the remote control channels are set.

Things to consider before installation

• Foundation – the operator is anchored with the supplied steel plate into a frost-proof foundation of compacted concrete class B25 or C25. A LineaMatic H foundation plate is also available as a spare part.
• Gradient – the operator is not suitable for gates that run uphill or downhill.
• Toothed rack – not included. Choose plastic or steel depending on the installation options. A plastic rack for LineaMatic H is, for example, Hörmann S6. It is mounted on the lower part of the gate; the supplied tool helps you align it.
• Settings – the extended menu (for example increasing the speed) may only be accessed by a qualified person. After any change, the forces must be measured.

Which operator to choose

• Gate up to 500 kg – Hörmann LineaMatic P.
• With photocell and flashing light – LineaMatic H with safety kit.

In the event of a fault, parts can be replaced individually, for example the LineaMatic H control board or the gearmotor. Check the part type against the operator rating plate.

We install the operator in the Košice and Prešov regions; see the page.