Hörmann ESE BS external receiver, 5-channel, BiSecur, 868 MHz

The Hörmann ESE BS adds BiSecur hand transmitter reception to a Hörmann operator. It is connected with a system cable to the BUS socket on the operator board, which also powers it. The receiver communicates bidirectionally, so after you press the status button the HS 5 BS hand transmitter shows you the door position. Depending on the operator type, not all channels may be functional.

Channel functions

• Channel 1 – impulse: open, stop, close, stop.
• Channel 2 – lighting on and off.
• Channel 3 – partial opening or pedestrian leaf, depending on the operator.
• Channels 4 and 5 – open only or close only.

Learning a hand transmitter

1. Press button P 1× to 5× according to the channel. The LED flashes as many times as the number of the selected channel.
2. Within 25 s, switch the hand transmitter to code transmission mode.
3. When the LED flashes rapidly and goes out, the code is stored.

The system cable can be extended to a maximum of 30 m. If you want to connect the receiver together with the UAP 1 board or the HOR 1 relay, use the Hörmann AS 1 Y-connector. For outdoor use there is the ESEi BS in an aluminium housing. The version with a 7 m cable and an external aerial is the ESE-MCX BS, the 3-channel version is the HE 3 BS. The hand transmitter with status feedback is the HS 5 BS. You can order the wiring through our in the Košice and Prešov regions; send questions to eshop@saver.sk.