Sliding gate operators 43 products

How to choose a sliding gate operator

A sliding gate operator is mounted on a base plate next to the gate and moves the leaf by means of a toothed rack. Four things decide the choice:

• Gate weight – the most important parameter. The capacity of the operator should be at least 20 to 30 % above the actual weight of the gate.
• Gate width – the leaf length the operator can move. The manufacturer states it for each operator.
• Frequency of use – for a family house an operator for a few cycles a day is sufficient; for a company, a site or an apartment building an operator for intensive use is recommended.
• Toothed rack – transfers the motor's force to the gate. The rack length equals the opening width plus 0.5 m.

Overview of the ranges we offer

230 V, 24 V or 36 V power supply

An operator with a 230 V motor is simpler and more affordable, suitable for a gate with normal use. 24 V operators are designed for intensive use as well, start and slow down the leaf smoothly and can be fitted with a backup battery – the gate stays operational during a power cut. The Came BKV range with 36 V supply is designed for heavy gates up to 2,500 kg with intensive use. The permitted frequency of use is stated by the manufacturer in the technical data of each operator.

Toothed rack

The rack is fixed to the bottom of the leaf and the operator's pinion engages with it. For lighter gates a nylon rack with a steel core is sufficient, for heavier gates we recommend a steel rack. The rack module must match the operator's pinion – most operators use module 4. Some kits include the rack in the package, other racks can be found in the Toothed racks category.

Safety and accessories

Every automatic gate needs photocells that stop the gate before an obstacle and a flashing light that warns of gate movement. Complete kits contain photocells and a remote control; the exact contents are listed with each product under “In the kit”. The product page also shows other accessories that belong to the operator.

Installation in the Košice and Prešov regions

In the Košice and Prešov regions we provide installation of the operator, setting of force and speed and instruction in its use. More on the page. Outside the region we deliver by courier throughout Slovakia and the Czech Republic and are happy to advise you by phone.

Frequently asked questions

Which operator should I choose for a 500 kg gate?

Choose an operator whose capacity is safely above the weight of the gate, i.e. at least 600 to 800 kg – for example Nice Robus 600, Came BXV06 or Came BX-78. For frequent opening, prefer a 24 V operator.

Is the toothed rack included in the kit?

Usually not; the rack is bought separately according to the gate length. Some kits include it – this is stated in the name and under “In the kit”.

How many metres of rack do I need?

The rack length equals the opening width plus 0.5 m. The rack is sold by the metre or in pieces that are joined on the gate.

How do I open the gate during a power cut?

Every operator has a manual release that lets you slide the gate by hand. 24 V operators can be fitted with a backup battery, so the gate stays operational during a power cut.

What is the difference between a kit and an operator on its own?

A kit contains the operator with control unit and usually a receiver, a remote control and photocells. An operator on its own is suitable for replacing an old motor or if you already have the accessories.

Can an operator be fitted to an existing gate?

Yes, if the gate slides easily by hand and has solid end stops. Both cantilever and track gates need a toothed rack and a solid base for the operator. Send us a photo of the gate and we will recommend a suitable operator.

Do you install outside Košice?

We provide installation in the Košice and Prešov regions. We deliver goods throughout Slovakia and the Czech Republic.