Came RE862 external receiver, 2-channel, 868 MHz, 50 users

The Came RE862 adds radio control to a gate, garage door or barrier operator that does not have a suitable receiver. You can also connect it to equipment from another manufacturer. It operates on 868.35 MHz, so it is intended for Came transmitters on this frequency. The OUT1 output only works in pulse mode; OUT2 can be set with a DIP switch to pulse or on/off.

Storing a transmitter

1. Hold button 1 for the OUT1 output or button 2 for OUT2 until the LED starts flashing.
2. Press and hold the button on each transmitter you want to store, one after the other. The LED lights up briefly for each one.
3. Wait about 20 s until the LED stops flashing, or press CLEAR.

To delete all codes, hold the CLEAR button for about 20 s. As delivered, the receiver accepts all supported transmitter types.

Things to bear in mind when wiring

Select the 12 V or 24 V power supply with the DIP switch. Only insert the ROLL card when copying codes, and disconnect the power supply first. It must be removed during normal operation. Suitable transmitters are the Came TOP-862EE and TOP-864EE. The 433.92 MHz version is the Came RE432M. You can order wiring through our in the Košice and Prešov regions; send any questions to eshop@saver.sk.