Came RBE4N external receiver, 4-channel, for the AF card

The Came RBE4N adds radio control to operators or devices from Came and other manufacturers. Four outputs control four devices, for example a gate, a pedestrian gate, a garage door and lighting. The frequency and transmitter type are determined by the inserted AF card, which is not included.

Output functions

• OUT1 and OUT2 – the mode cannot be set.
• OUT3 and OUT4 – use the DIP switch to set the mode: hold-to-run command, 3 s pulse, on/off or on for 5 minutes.

Storing a transmitter

1. On the receiver, press and hold the output button, for example 1 for OUT1.
2. While holding it, press the transmitter button you want to assign.
3. The LED lights up to confirm it is stored. Repeat for the other outputs.

TAM transmitter codes can also be copied with the 119RIR211 cable, which is not included. Install modules at least 5 m apart, with the antenna as high as possible. A suitable transmitter is, for example, the Came TOP-432EE with the AF43S card. For more users and management via a display, choose the Came RBE4024. You can order the wiring through our in the Košice and Prešov regions; send questions to eshop@saver.sk.