Hörmann HNA Outdoor emergency battery
- Hörmann HNA Outdoor emergency battery for RotaMatic, VersaMatic and LineaMatic entrance gate operators
- During a power failure it lasts approx. 18 hours or up to 5 gate cycles, 2 × 12 V, 2.3 Ah
- The operator board must have a battery connector: RotaMatic from autumn 2010, LineaMatic from 10/2009
Call us, we will help you choose the right part or accessory.
+421 903 628 111Mon–Fri 8–16, also WhatsApp and ViberDescription
During a power failure an entrance gate operator does not work. The Hörmann HNA Outdoor emergency battery powers it for approx. 18 hours or up to 5 gate cycles when fully charged and with no accessories connected. It recharges automatically once power is restored. It has an IP65 protection rating, so it can be mounted outdoors on a wall, on the floor or, depending on the operator type, directly on the operator. It connects to the board with a fixed cable approx. 70 cm long.
Which operators
- Swing gates – RotaMatic and VersaMatic.
- Sliding gates – LineaMatic, LineaMatic P and H.
- Garage door operators – choose HNA 18-4 or HNA 18-3.
Installation
- Disconnect the operator power supply and open the control board cover.
- Mount the battery so that the LED is visible.
- Plug the connectors into the board. Observe the correct polarity, otherwise the battery will not work.
- Switch on the power. The orange LED means mains voltage is present and the battery is charging (max. 24 h). The green LED means the mains is absent and the operator is running from the battery.
Check the battery function every 3 months. It operates at temperatures from −15 to +45 °C. Send compatibility questions to eshop@saver.sk.
Specifications
| Power supply | 24 V DC (2 × 12 V), 2,3 Ah |
| Dimensions | 213 × 143 × 96 mm |
| Weight | 2,3 kg |
| Protection rating | IP65 |
| Operating temperature | -15 až +45 °C |
| Compatibility | RotaMatic from autumn 2010, VersaMatic, LineaMatic / P / H from 10/2009 |
