Hörmann base plate for LineaMatic H sliding gate operators

The base plate compensates for minor inaccuracies when drilling into concrete and slight shifts of the foundation caused by the weather. With the LineaMatic H operator, the plate and the accessory bag are already included in the operator pack; here you buy it as a spare part. For LineaMatic and LineaMatic P operators it is an optional accessory, and the plate and bag are bought separately.

Before installation

• Foundation – concrete of at least class B25 / C25, compacted, down to frost-free depth. With closing edge safety, the foundation must be larger.
• Cables – run the 230 V mains supply in a conduit and the 24 V accessory cables in a separate conduit. The plate has openings for them.
• Curing – the foundation must cure sufficiently before installation.

Procedure

1. Use the plate as a template and mark 4 holes of Ø 10 mm for the anchors.
2. Before driving in the anchors, push the operator fixing screws through the plate from below and tighten them with nuts.
3. Tighten the anchors to a torque of 45 Nm, then screw the operator onto the plate and adjust its height.

We install LineaMatic H operators in the Košice and Prešov regions, see the page. Send questions to eshop@saver.sk.