Hörmann FIT 4 BS internal push-button, wireless, 4-channel, BiSecur

The Hörmann FIT 4 BS is a wall-mounted radio push button with four buttons. Each button can control a different operator or a different function, for example the garage door, the entrance gate and the lighting. It works with Hörmann BiSecur receivers and, after switching over, also with 868 MHz fixed code.

How to teach the push button the code from a transmitter

1. Hold the transmitter to the right of the push button, and press and hold the button whose code you want to transfer.
2. When the push button LED flashes alternately red and blue, press and hold the push button key that is to learn the code.
3. When the LED flashes blue rapidly, the code has been recognised. Release both buttons.

You have 15 seconds for the transfer; after that, repeat the procedure.

Things to consider before installation

• Range – depends on the mounting location. Before installation, test whether the signal reaches the operator. On a metal surface, mount with a 2–3 cm gap.
• Adhesive fixing – a push button fixed with adhesive can only be repositioned to a limited extent.
• Batteries – when the LED flashes red 2 times on pressing, replace the batteries soon.

A version with a button for querying the door position is available as the Hörmann FIT 5 BS, and with one button as the FIT 1 BS. The push button with two buttons and an input for wired control devices is the FIT 2-1 BS. Send questions to eshop@saver.sk.