Hörmann UAP1 universal adapter board

The Hörmann UAP 1 adds separate commands from external push buttons, for example the Hörmann IT 4 internal push button, or from a smart home system to a gate or door operator. You can then open, stop or close the door separately and switch on partial opening and the operator lighting. Two potential-free relays report the open and closed end positions; the third relay is optional, for example for garage lighting.

Which operators it suits

• SupraMatic 2 (from the letter D at the end of the serial number) and SupraMatic 3 (from the letter A),
• RotaMatic and LineaMatic up to 02/2017 (from the letter B or C respectively) and from 03/2017,
• VersaMatic and VersaMatic P.

Not suitable for ProMatic, ProMatic Akku, RotaMatic Akku, DTH 700, DTU 250, STA 400 and STA 90/180/220.

UAP 1 or UAP 1 HCP

Series 4 operators (ProMatic 4, SupraMatic E/P 4) have a new bus and need the Hörmann UAP 1 HCP. The series is shown on the operator's rating plate.

Connection

The pack contains a housing with protection rating IP65, a 2 m system cable and a wiring diagram. If you want to connect the UAP 1 together with an ESE receiver to one BUS input of the operator, use the Hörmann AS 1 Y-connector. The relay contacts can take max. 30 V DC / 2.5 A or 250 V AC / 500 W with a resistive load. Wiring may only be carried out by an electrician. Please send any questions to eshop@saver.sk.