Hörmann Gateway WLAN switch for controlling doors via Wi-Fi, with HCP adapter

The Hörmann WLAN Gateway integrates your garage door into a smart home. You can then open the door with an app on your phone or by voice command. The Gateway connects to the operator with a system cable and to the home network via Wi-Fi.

Which operators

• SupraMatic E and P series 4,
• ProMatic series 4,
• EcoStar Liftronic 700 II and 800 II,
• Hörmann 545 and 560 industrial controls.

These operators need the HCP adapter (HAP 1 HCP) for connection, which is included in the package. The Gateway cannot be used together with the UAP 1 module.

What you need at home

For control via the internet and by voice you need a smart home hub: an Apple HomePod or Apple TV, a device with Amazon Alexa, or Google Nest. If you have none of these, use the Hörmann homee Brain. You can integrate a series 4 operator into a KNX system via the Hörmann KNX Gateway. You set up the Gateway in the Apple Home or Hörmann Cloud app. Via Apple Home you can also control the door with the Hörmann WLAN internal push button, which also serves as a wall button.

Package contents

• Hörmann WLAN Gateway (80 × 80 × 35 mm, white, for indoor use),
• HAP 1 HCP adapter,
• 2 m system cable and 10 cm system cable.

Connection tip

After first connecting to the operator, the bus devices must be scanned again. On the ProMatic 4, set DIL switch 8 to ON and after a few seconds back to OFF. On the SupraMatic 4, select parameter 01 in menu 37 and confirm.