Hörmann KNX Gateway
- Gateway for integrating a Hörmann garage door operator into a KNX building automation system
- For SupraMatic E/P and ProMatic series 4 operators; 9 cm bus cable included
- Requires an existing KNX system with a KNX IP interface and ETS software
Call us, we will help you choose the right part or accessory.
+421 903 628 111Mon–Fri 8–16, also WhatsApp and ViberDescription
The Hörmann KNX Gateway turns the garage door operator into a KNX bus device. You can then control the door with KNX switches and push-buttons and include it in scenes, for example “when the garage opens, switch on the light”. The gateway is not stand-alone smartphone control; it needs a working KNX system.
Which operators
- SupraMatic E and P series 4,
- ProMatic series 4,
- Hörmann 545 and 560 industrial controls.
Older series 3 operators, the SupraMatic HT 3 and the RotaMatic, VersaMatic and LineaMatic entrance gate operators are not supported by the gateway.
What to bear in mind before installation
- KNX system – you need at least a KNX bus power supply and a KNX IP interface. You program the operator in the ETS software.
- Several doors – a separate gateway is needed for each operator.
- Environment – IP20, for dry rooms only, −20 to +60 °C.
Without a KNX system, choose the Hörmann homee Brain or the Hörmann WLAN Gateway. We install Hörmann garage doors in the Košice and Prešov regions; see .
Specifications
| Power supply | 24 V DC |
| Dimensions | 43 × 28 × 16 mm |
| Weight | 83 g |
| Material | Plastic |
| Protection rating | IP20 |
| Operating temperature | -20 až +60 °C |
| Compatibility | Hörmann SupraMatic E/P series 4, ProMatic series 4, controls 545, 560 |
