RollingCenter support wheel, large, Ø 98 mm

The 41 G support wheel is inserted into the end of the bottom C-profile of a cantilever sliding gate. When the gate closes, it runs onto the lower part of the stop (catcher) on the post and supports the front end of the gate. In the closed position the gate therefore does not hang on the carriages alone.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 98 mm, width 30 mm.
• Holder – length 190 mm, width 106 mm, the wheel protrudes 18 mm below the holder.
• Finish – galvanised steel.

Which profile and stop

The wheel is for the GIPI 6 RM/MZ 136 × 143 mm C-profile. Complete it with the 50 G stop. The opposite end of the profile is closed with the 153/G nylon end cap. If you are looking for a profile or carriages in this size, write to us.

Alternatives

For the 94 × 85 mm profile there is the 41 P medium wheel, for the 70 × 60 mm profile the 41 B small wheel. The end caps for these profiles are 153/P and 153/B. More parts can be found in the Gate stops and catchers category. We are happy to help you choose at eshop@saver.sk.