RollingCenter support wheel, small, Ø 68 mm

The 41 B support wheel is inserted into the end of the bottom C-profile of a cantilever sliding gate. When the gate closes, it runs onto the lower part of the stop (catcher) on the post and supports the front end of the gate. In the closed position the gate therefore does not hang on the carriages alone.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 68 mm, width 15 mm.
• Holder – length 132 mm, width 50 mm, the wheel protrudes 13 mm below the holder.
• Finish – galvanised steel.

Which profile and stop

The wheel is for the GIPI 4 RP/RPZ 70 × 60 mm C-profile, for example the RollingCenter 70 × 60 mm C-profile. Complete it with the 50 B stop. The opposite end of the profile is closed with the 153/B nylon end cap. These parts are also included in the cantilever gate kit up to 6 m.

Alternatives

For the 94 × 85 mm profile there is the 41 P medium wheel, for the 136 × 143 mm profile the 41 G large wheel. More parts can be found in the Gate stops and catchers category. We are happy to help you choose at eshop@saver.sk.