RollingCenter stop, large

The 50 G stop (catcher) is mounted on the post that the cantilever sliding gate reaches when closing. The bottom C-profile of the gate enters the stop, the guide centres it and the gate stops in the exact position. The end of the C-profile usually has a support wheel that runs onto the lower part of the stop in the closed position, so the front end of the gate does not hang freely.

Which profile

• C-profile – GIPI 6 RM/MZ 136 × 143 mm.
• Dimensions according to the RollingCenter catalogue – height 223 mm, front part height 165 mm, width 152 mm, depth 90 mm, plate thickness 4 mm.
• Finish – galvanised steel.

What goes with it

In the closed position the 41 G large support wheel at the end of the C-profile runs onto it. If you are looking for a profile or carriages in this size, write to us.

Alternatives

For the 94 × 85 mm profile there is the 50 P medium stop, for the 70 × 60 mm profile the 50 B small stop. For the 136 × 142 mm profile we also offer the Umakov H/15P-145 bottom stop. More parts can be found in the Gate stops and catchers category. We are happy to help you choose at eshop@saver.sk.