RollingCenter catcher with guide rollers, adjustable, 80–150 mm

The 50 RS catcher (top meeting point) is mounted on the post on the closing side of a sliding gate. When closing, the top profile of the gate enters between two vertical guide rollers. The rollers centre the gate and hold it in the closed position so that it does not sway, for example in the wind.

Specifications according to the RollingCenter catalogue

• Roller spacing – adjustable 80 – 150 mm, according to the width of the gate's top profile.
• Rollers – nylon, diameter 40 mm, removable.
• Bracket – top plate length 80 mm, galvanised steel.

Installation

Screw or weld the catcher to the post so that the rollers are at the height of the gate's top profile. Set the spacing so that the profile enters between the rollers without catching. If there is nowhere to fix the catcher, use the 174 × 112 mm side bracket.

Alternatives

For a narrower profile there is the 50 RP catcher with 40 – 80 mm spacing. A stop with rubber in the middle is the 80 mm top stop with rollers or the adjustable 55 – 90 mm stop. You will find more parts in the Gate stops and catchers category. We are happy to help you choose at eshop@saver.sk.