Came FTL20 operator kit for double-leaf gates, up to 4 m, 24 V

The Came FTL20 is a kit of two arm operators for double swing gates with leaves up to 2 m wide. It is particularly suitable for wide concrete or masonry pillars where the leaf pivot axis is no more than 20 cm from the pillar edge. The 24 V DC motors handle 40 cycles per hour; the leaf opens by 90° in 19 to 25 s. The control board is built into one of the operators.

Functions

• self-learning of leaf travel and slowdown points, obstacle detection via encoder,
• partial opening for pedestrians, automatic closing,
• memory for up to 25 users,
• in a power cut you release the operator with a key.

Things to consider before installation

• Stops – on the operator you set the stops and limit switches for both opening and closing. In the closed position, the gate must have a fixed stop.
• Electric lock – the manufacturer recommends one for swing gates for reliable closing, for example the Came electric lock.
• Environment – protection rating IP44, operation at −20 to +55 °C.

For leaves up to 2.3 m there are the Came FAST operators; more types can be found in the Articulated arm operators category. In the Košice and Prešov regions we install the operator, more on the page.