Came EDGH20R1 sensitive safety edge for gates, 8K2, profile 44 × 49 mm, 2.0 m

The Came EDGH20R1 is an EDG series sensitive safety edge with a 44 × 49 mm profile. It is fitted to the closing or opening edge of the gate. If the gate hits an obstacle, the edge changes its resistance and the control unit stops the gate or reverses it. The edge is resistive with 8.2 kΩ, so the unit also monitors for a broken or short-circuited cable.

Installation

• Length – 2000 mm. Came states that the edge can be shortened with the special 806ED-0171 shears.
• Fixing – the edge slides into the 806ED-0163 aluminium profile (2 m), which is screwed to the gate.
• Cable – connect it to the control unit with the 806ED-0169 connection cable.

Connection

• 8K2 input – directly to control units with an input for a resistive edge, for example the Came ZLX24MA.
• Without an 8K2 input – via the Came ECN3F242 evaluation unit (cat. 3, PL e).
• Wirelessly – via the Came RIO 2.0 system.

If you are not sure about the profile height or the wiring, write to us at eshop@saver.sk.