Came DIR20 photocells, relay, range 20 m
- Pair of Came outdoor safety photocells with a range of up to 20 m
- Relay output with NC contact, protection rating IP54
- 12/24 V AC/DC power supply from the control board
Call us, we will help you choose the right part or accessory.
Description
Came DIR20 photocells monitor the gate area with an infrared beam. If something interrupts the beam, the operator treats it as an obstacle. For safety reasons, they should be part of every automatic gate or barrier operator. The pack contains two photocells (transmitter and receiver) and instructions.
When to choose the DIR20
- Range – up to 20 m. For a standard driveway, the DIR10 with a range of 10 m is enough; for wide areas there is the DIR30 with a range of 30 m.
- Wiring – they are connected to the safety device input on the Came control board. You can connect two pairs, for example for reopening during closing and for partial stop.
Installation
- Height – mount the photocells approximately 50 cm above the ground, facing each other.
- Alignment – the transmitter and receiver must face each other exactly.
- Board – when removing the board from the housing, only lever it at the point marked in the instructions.
The DIR-L aluminium post is a suitable post; you can fit two photocells one above the other with the DIR-P extension. If the cover is damaged, we supply a replacement cover. Send any questions to eshop@saver.sk.
Specifications
| Dimensions | 46 × 108 × 23 mm |
| Weight | 300 g |
| Material | ABS polycarbonate |
| Protection rating | IP54 |
| Rated current draw | 60 mA |
| Operating temperature | -20 až +55 °C |
| Photocell range | do 20 m |
| Photocell connection type | Relay (NC contact) |
