Came 119RIR137 DIR10 photocell board, RX receiver
- Replacement RX receiver board for Came DIR10 photocells
- Power supply 12/24 V AC/DC from the control unit, as for the complete photocell
- For the TX transmitter, order the 119RIR136 board
More options (2)
Call us, we will help you choose the right part or accessory.
Description
The Came 119RIR137 is the bare board of the RX receiving photocell from the Came DIR10 pair. If the receiver stops working and the housing is in good order, you only replace the board and do not need to buy a whole pair of photocells.
Replacing the board
- Power off – switch off the operator power supply before replacing.
- Removal – when removing the board from the housing, lever only at the point marked in the photocell manual.
- Wiring – connect the wires to the same terminals as on the original board. DIR photocells do not need aligning.
- Check – after replacement, interrupt the beam and check that the operator responds.
Related parts
- Transmitter – 119RIR136 TX board.
- Cover – replacement DIR photocell cover.
- Complete pair – Came DIR10.
If you are not sure which part you need, send us a photo of the board at eshop@saver.sk. In the Košice and Prešov regions we carry out the repair as part of our .
Specifications
| Dimensions | 36 × 75 × 13 mm |
| Weight | 50 g |
| Compatibility | CAME DIR10 |
