Nice SOON garage door operator, up to 20 m²

The Nice SOON is an operator for sectional doors with torsion springs above the door. It has no rail under the ceiling; it slides directly onto the spring shaft beside the door. The control unit is built in, the motor runs on 24 V DC. The light in the operator has a 12 V / 21 W bulb with a BA15S base.

Functions

• Performance – torque 30 Nm nominal and 50 Nm maximum, 15 cycles per hour with a 3 m high door.
• Radio control – the unit has an SM connector for a plug-in receiver, for example the Nice OXI BD.
• Power cut – emergency power supply with the Nice PS124 battery.
• Release – operated from the ground, it disengages the motor from the gearbox.
• Flashing light – connect the Nice ELDC to the flashing light output.

Things to consider before installation

• Shaft – the output bore has a diameter of 25.5 mm. A thicker shaft can be handled with the Nice CRA9 adapter.
• Balancing – the door must be balanced and move easily by hand.
• Environment – the operator must not be installed outdoors.

For industrial doors up to 35 m², choose the Nice SUMO 2000. In the Košice and Prešov regions we install the operator; more on the page.