Nice PS124 backup battery, with integrated charging, 24 V, 1.2 Ah

Nice PS124 is a backup battery that powers the operator during a power cut. This means you can open the gate even when there is no mains power. On battery power the gate may move more slowly, even if you have set fast operation. The battery is charged from the control unit when the mains supply is working.

Which operators it suits

The battery is for Nice Robus, Popkit, SN6031–41, MC424, S4BAR, Run 1500, NKSL, SLH, Soon, Wingo 2024/3524, Hopp and Hyke control units. Other operators use other batteries:

• Nice PS324 – MC824H control unit.
• Nice PSS124 – for new control boards, with the CABLA10 cable also for older ones.
• Nice PS224 – MBAR and LBAR barriers.

Connection and checking

1. Disconnect the operator from the mains.
2. Insert the narrower battery connector into the wider connector of the control unit. You do not need to observe polarity.
3. LED L2 on the battery lights up when the battery is powering the operator. If it does not light up, the battery is flat.
4. Switch the mains on. LED L1 lights up during charging; a full charge takes approx. 16 hours.

To connect the battery to the R30 control unit, use the Nice CABLA11 cable. Capacity drops in the cold, to approx. 30 % at −10 °C. The battery lasts 4 to 6 years. We will help you choose at eshop@saver.sk.