Nice Wingo 4000 operator kit for double-leaf gates, up to 4 m, 230 V, with Nice Era EPM photocells

This kit combines the Nice Wingo 4000 operator for double swing gates with a pair of Nice Era EPM photocells. The gate can have an overall width of up to 4 m, i.e. leaves up to 2 m. The recommended clear passage width is 3.5 m. The 230 V AC motors are not suitable for heavy-duty operation; they suit the gate of a family house.

What is in the kit

• Two Wingo 4000 motors – 230 V AC, with a stroke of 320 mm.
• Nice MC800 control unit – with plug-in bidirectional OXIBD receiver, programming with three buttons, automatic fault diagnostics and partial opening for pedestrians.
• EPM photocells – stop or reverse the gate when the beam is interrupted. They are required for automatic closing.

Before installation

• Gate stops – in the open position the leaf is stopped by the adjustable mechanical stop in the operator. In the closed position the gate must have a mechanical stop.
• Environment – protection rating IP44, operation at −20 to +50 °C.
• More frequent opening – choose Wingo 2024 at 24 V with photocells.

In the Košice and Prešov regions we install the operator; more on the page .