Nice TOO3024 operator kit for double-leaf gates, up to 6 m, 24 V

The Nice TOO3024 is a kit of two 24 V DC linear operators for double swing gates with a total width of up to 6 m. According to the instructions, a leaf can be up to 3 m long and weigh up to 300 kg; we recommend a leaf of up to 150 kg. The motors are suitable for heavy-duty use. The kit includes the Nice MC424L control unit with a built-in radio receiver and two Era Inti 2 transmitters.

Functions

• the control unit learns the positions of the mechanical stops and sets the slowdown of the leaves,
• via the IBT4N connector and the IBT4N adapter you can connect the Oview programmer or the IT4WIFI module,
• during a power cut, the optional Nice PS124 battery powers the unit,
• without power, release the operator with the key and open the leaf by hand.

What to bear in mind before installation

• Stops – the gate must have mechanical stops for both opening and closing.
• Installation dimensions – you will find dimensions A and B for the chosen opening angle in the instructions; for example, at 90° A is 95 mm and B is 270 mm.
• Photocells – the MC424L unit has relay FOTO inputs and no BlueBus. Suitable are for example Nice Era EPM photocells; the kit with them is the TOO3024 with EPM photocells.
• Environment – protection rating IP54, operation at −20 to +50 °C.

For less frequent opening there is the 230 V TOO3000. We install the operator in the Košice and Prešov regions; more on the page.