Nice IBT4N adapter for connecting O-View and IT4WIFI to the control unit
- Adapter for connecting Nice O-View and IT4WIFI modules to a Nice control unit
- For Nice control units with a Bus T4 connector; powered by the control unit
- The cable to the adapter can be up to 100 m long; IP20 protection rating, indoor use only
Call us, we will help you choose the right part or accessory.
Description
The Nice IBT4N is the interface between a Nice control unit and a programming or communication module. Via the adapter you connect the O-View programming unit or the IT4WIFI Wi-Fi module. You can then set up the operator, diagnose faults and update the firmware.
What it is for
- Setup – configuring and programming Nice operators.
- Diagnostics – detecting faults and checking settings.
- Update – uploading new firmware to the operator.
- Software – working via Nice O-View or MyNice Pro.
Which modules
The adapter is used with the Nice O-View and Nice IT4WIFI modules. According to their descriptions, the O-View and IT4WIFI modules come with the adapter included. On its own, it is useful as a replacement or a second unit.
What to bear in mind when wiring
The adapter does not need its own power supply; it is powered by the control unit via the connector (max. current draw 200 mA). It is designed for dry indoor spaces only. If you are not sure whether your operator has a suitable connector, write to us at eshop@saver.sk.
Specifications
| Dimensions | 34 × 28 × 18 mm |
| Weight | 50 g |
| Protection rating | IP20 |
| Operating temperature | -20 až +55 °C |
| Compatibility | NICE with IBT4 connector |
