Nice TOO3000 operator kit for double-leaf gates, up to 6 m, 230 V, with Nice Era EPMB photocells

The kit contains the Nice TOO3000 operator with the MC800 control unit and a pair of Nice Era EPMB photocells. It is for double swing gates with an overall width of up to 6 m. According to the instructions a leaf can be up to 3 m long and weigh up to 300 kg; we recommend leaves up to 150 kg. The 230 V AC motors manage 24 cycles per hour, so they are not suitable for heavy-duty operation.

Functions

• the control unit learns the positions of the mechanical stops and calculates the slowdown and partial opening points,
• the EPMB photocells are connected with two wires via the BlueBus; each pair is set with jumpers,
• modules such as IT4WIFI or the Oview programmer connect via the IBT4N connector,
• in a power failure, release the operator with the key and open the leaf by hand.

Before installation

• Gate stops – the gate must have mechanical stops for both opening and closing.
• Installation dimensions – dimensions A and B for the chosen opening angle are given in the instructions; for example at 90° A is 95 mm and B is 270 mm.
• Photocells – the transmitter and receiver must be on parallel posts facing each other; the effective range is 15 m.
• Environment – protection rating IP54, operation at −20 to +50 °C.

In the Košice and Prešov regions we install the operator; more on the page .