RollingCenter wheel with bracket under the frame, C45, 2 bearings, O21 groove

The 1030PCO wheel carries a heavier tracked sliding gate. It is made of C45 steel, has two bearings and sits in a closed holder. You weld or bolt the holder under the bottom profile of the gate, so the wheel does not have to be fitted into the frame separately. The O groove is rounded and, according to the manufacturer's catalogue, is intended for RollingCenter NEWOMEGA, NEWOMEGA2, FLOOR, HEAVY, IBBI and SISTEMA tracks.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 100 mm, 80 mm at the bottom of the groove, width 30 mm, O groove 21 mm.
• Holder – length 140 mm, width 38 mm, overall height 106 mm, 2 holes Ø 9 mm at 108 mm centres.
• Load capacity – 350 kg per wheel.
• Finish – galvanised steel (yellow zinc).

Things to consider when choosing

The gate needs at least 2 wheels and their total load capacity must be greater than the gate weight. A smaller wheel with a closed holder and 1 bearing is the 827PCO Ø 80 mm. If you want to fit the wheel into the gate frame, choose the version with the 1026PSO or 1227PSO holder. We will help you choose at eshop@saver.sk.