RollingCenter® C45 wheel with 2 bearings, prepared for grease pin, O21 groove
RollingCenter® Reference 16038IO Authorised dealer

RollingCenter wheel prepared for grease pin, C45, 2 bearings, O21 groove

  • RollingCenter 16038IO C45 steel wheel with 2 bearings, Ø 160 mm, O21 groove
  • Prepared for a grease pin with a diameter of 20 mm, load capacity 640 kg per wheel
  • The pin is purchased separately – B2 series (e.g. B2-60)
Kč2,110.00Kč1,743.80
Tax includedtax excl. · Kč1,743.80 excl. VAT · Kč2,110.00 incl. VAT
To order · Available within 14 working days
Collection in our shop at Zborovská 6, Košice
Total incl. VATTotal excl. VAT

SAVER advisor
Need help choosing?

Call us, we will help you choose the right part or accessory.

+421 903 628 111 Mon–Fri 8–16

Description

The 16038IO wheel is designed for heavy tracked sliding gates. It is made of C45 steel, has two bearings and no bracket. It is mounted on a grease pin through which you can regrease the bearings. The O groove is rounded and, according to the manufacturer's catalogue, is designed for RollingCenter NEWOMEGA, NEWOMEGA2, FLOOR, HEAVY, IBBI and SISTEMA tracks.

Specifications according to the RollingCenter catalogue

  • Wheel – diameter 160 mm, 141 mm at the bottom of the groove, width 38 mm, O groove 21 mm.
  • Pin hole – 20 mm.
  • Load capacity – 640 kg per wheel.
  • Finish – galvanised steel (yellow zinc).

What else to buy

According to the catalogue, the wheel is combined with B2 series (M20) grease pins. We offer the B2-60 M20 × 75 grease pin. Choose the pin length according to the width of the bracket or profile in which the wheel will be mounted. A gate needs at least 2 wheels, and their total load capacity must be higher than the gate weight. For a lighter gate, a wheel with bracket such as the 1227PSO or 1030PCO is sufficient. We will help you choose at eshop@saver.sk.

Specifications

Weight2 kg
MaterialSteel
Surface finishGalvanised steel

Similar products

Back to top