In stock
Nice Wingo 3524/5024 single motor 24 V (max. 3.5 m)
Nice Reference WG3524 Authorised dealer

Nice Wingo 3524/5024 swing gate operator, up to 3.5 m, 24 V

  • Replacement Nice Wingo 3524 single motor (WG3524, data according to WG5024) for gate leaves up to 3.5 m
  • 24 V DC motor suitable for heavy-duty use, stroke 470 mm, protection rating IP44
  • With front and rear brackets and a mechanical stop for the open position, without control unit
Kč4,386.00Kč3,624.79
Tax includedtax excl. · Kč3,624.79 excl. VAT · Kč4,386.00 incl. VAT
In stock – last 1 pcs · orders placed by 12:00 ship today
Collection in our shop at Zborovská 6, Košice
Total incl. VATTotal excl. VAT

SAVER advisor
Need help choosing?

Call us, we will help you choose the right part or accessory.

+421 903 628 111 Mon–Fri 8–16

Description

Nice Wingo 3524 is a 24 V DC linear motor for swing gates. As a single unit it is used to replace a damaged motor in a Wingo 3524 or 5024 operator, or to add a second leaf. The 24 V DC motor is suitable for heavy-duty use.

What is in the pack

  • Motor – stroke 470 mm, max. force 1,500 N, operation at −20 to +50 °C.
  • Brackets – front bracket for the leaf and rear bracket for the pillar.
  • Stop – mechanical stop on the motor for the open position.

What to bear in mind before installation

  • Leaf weight – the permitted weight decreases with leaf length, max. 500 kg. Compare it with the chart in the manual.
  • Control unit – the motor is connected to the Nice MC424L unit; if the board is damaged, the MCA2R10 is sufficient.
  • Closed position – the gate must have a stop in the closed position.
  • Shorter leaf – for leaves up to 2 m, the Wingo 2024/4024 is sufficient. The complete kit is the Wingo 3524 / 5024.

Send compatibility questions to eshop@saver.sk. We replace motors in the Košice and Prešov regions as part of our .

Specifications

Dimensions98 × 920 × 95 mm
Weight7 kg
Max. gate weight500 kg
Protection ratingIP44
Motor power supply24 V DC – suitable for heavy-duty use
Rated current draw2 A
Max. power consumption85 W
Duty cycle40 cycles/h
Opening speed1,2–1,6 cm/s
Thrust1 500 N
Operating temperature-20 až +50 °C
Max. width of 1 leaf3,5 m
Stroke / travel470 mm
CompatibilityNICE Wingo 3524
Mechanical end stopsEnd stop required in closed position

Similar products

Back to top