Nice MCA2R10 control board Wingo 2024/3524/4024/5024
Nice Reference MCA2R10 Authorised dealer

Nice MCA2R10 control unit for Wingo 2024/3524/4024/5024

  • Nice MCA2R10 replacement control board for two 24 V Wingo 2024, 3524, 4024 and 5024 operators
  • New type with built-in receiver (FLO, FloR, O-Code, Smilo, 100 memory slots), replaces the old MCA2 without receiver
  • Bare board without enclosure and transformer – the complete unit is available as the MC424L
Kč4,205.00Kč3,475.21
Tax includedtax excl. · Kč3,475.21 excl. VAT · Kč4,205.00 incl. VAT
To order · Available within 7 working days
Collection in our shop at Zborovská 6, Košice

Nice OXI-BD receiver, plug-in, 4-channel, bidirectional rolling code, 433 MHz In stock +Kč1,240.00Kč1,024.79
Nice OXI-LR receiver, plug-in, 4-channel, bidirectional LR code, 433 MHz, long range In stock +Kč1,482.00Kč1,224.79
Total incl. VATTotal excl. VAT

SAVER advisor
Need help choosing?

Call us, we will help you choose the right part or accessory.

+421 903 628 111Mon–Fri 8–16, also WhatsApp and Viber

Description

The Nice MCA2R10 is the control board from the MC424L unit, which controls two 24 V Nice Wingo operators on a swing gate. Use it when only the board is damaged and the enclosure with the transformer remains. The board learns the end positions and running time itself, monitors the motor load and detects obstacles.

Which operators it suits

  • Nice Wingo 2024, 3524, 4024 and 5024 – for example from the Wingo 3524 / 5024 kit.
  • 230 V Wingo 4000 and 5000 – do not use this board.
  • Replacement motors – Wingo 2024 for leaves up to 2 m and Wingo 3524 up to 3.5 m.
  • Complete unit – Nice MC424L in an enclosure, transformer separately as the PRMC42401.

After replacing the board

  1. Set the operator selector according to the motor type; the table is in the manual.
  2. Move the leaves to approximately halfway and press P2 and P3 together – the board finds the end positions.
  3. To store a transmitter, hold P4 until the radio LED lights up. Then, within 10 seconds, hold the transmitter button until the LED gives 3 long flashes.

Disconnect both the mains and the battery before any work. We will help you choose at eshop@saver.sk; in the Košice and Prešov regions we carry out the replacement as part of our .

Specifications

Weight500 g
Motor power supply24 V DC – suitable for heavy-duty use
CompatibilityNICE Wingo 2024/3524/4024/5024

Similar products

Back to top