Nice PLA13 mechanical end stop for Wingo

The Nice PLA13 is the mechanical end stop of the Wingo operator. It is fixed to the operator and is used to set the position in which the leaf stops when opening. A ground stop is therefore not needed and the leaf does not bang at the end of its travel. Order the part if the original stop has been lost or damaged.

Setting the stop

1. Release the operator manually.
2. Loosen the mechanical stop screw.
3. Move the leaf by hand to the position where it should stop when opening.
4. Place the stop against the pin and tighten the screw firmly.
5. Return the leaf to the closed position and lock the operator.

Things to consider

• Outward-opening gate – according to the instructions, the motor power wires must be swapped over.
• Compatibility – the Wingo instructions apply to the Wingo 2024/4024 and Wingo 3524/5024 motors as well as the 230 V Wingo 4000/5000.

More parts can be found in the Swing gate operator spare parts category. We are happy to help you choose at eshop@saver.sk.