Came GARD LS4 barrier housing, passage up to 3.8 m, with encoder

The Came GARD LS4 is a road barrier for intensive use, for example at the entrance to a car park, site or company. This product is the housing alone, made of galvanised painted steel (RAL 7024), with an irreversible 24 V DC motor with encoder, ZL392-C control electronics with display and a G04060 Ø 50 mm balancing spring. The boom opens in 2 to 6 seconds, and the encoder sets the speed and slowdowns by itself. Came states a service life of 1,500,000 cycles.

Which boom to choose

• Passage up to 2.8 m – 803XA-0051 boom, 90 × 35 mm, 3.05 m long, with a groove for an LED strip.
• Passage up to 3.8 m – 803XA-0050 boom, 4.05 m long; for passages over 3 m a fixed or movable rest is mandatory.
• Round boom – the Ø 60 mm G0402 can only be attached with the 803XA-0590 flange.

Electronics and extensions

• Control – connector for the AF receiver card, terminals for a code keypad and RFID readers (with R800 and R700 cards).
• Linking – 2 RSE connectors for two opposing barriers, CRP or Modbus RTU, ready for CAMEConnect.
• Signalling – terminals for an LED strip on the boom; the KLT1FDSW flashing light fits in the cover.
• Power failure – 803XA-0290 backup power supply kit; the 2 × 12 V 7 Ah batteries are separate.

Before installation

• Foundation – the housing is anchored to a foundation plate. If the ground is not solid, prepare a concrete foundation and conduits for the cables.
• Opening direction – the barrier is reversible; the direction is set during installation.
• Frost – as standard −20 to +55 °C, down to −40 °C with the 803XA-0630 heater.
• Complete kit – if you do not want to assemble the parts yourself, choose the GARD LS4 with a 3 m boom or with a 4 m boom.

The housing has IP54 protection and weighs 56 kg. In the Košice and Prešov regions we install the barrier; more on the page .