In stock
Came KLT1FDSW LED flashing light, green, red, white, for Gard LS4/LT4 barriers and VER PLUS operators
Came KLT1FDSW LED flashing light, green, red, white, for Gard LS4/LT4 barriers and VER PLUS operators – front view
Came Reference 806LA-0060 Authorised dealer

Came KLT1FDSW warning light for GARD LS4/LT4 barriers and VER PLUS operators, green-red-white

  • Came KLT1FDSW LED flashing light with green, red and white light for Came GARD LS4 and LT4 barriers and Came VER PLUS garage door operators
  • Power supply 24 V AC/DC, power 3 W, protection rating IP54, built-in 433 and 868 MHz antenna
  • With VER PLUS operators it only works with control board version 1.8.0 or later
Kč1,300.00Kč1,074.38
Tax includedtax excl. · Kč1,074.38 excl. VAT · Kč1,300.00 incl. VAT
In stock – last 1 pcs · orders placed by 12:00 ship today
Collection in our shop at Zborovská 6, Košice
Total incl. VATTotal excl. VAT

SAVER advisor
Need help choosing?

Call us, we will help you choose the right part or accessory.

+421 903 628 111 Mon–Fri 8–16

Description

The Came KLT1FDSW is a flat LED flashing light with traffic light function. With green, red and white light it shows whether the barrier or gate is moving or open. Mount it on a wall or directly on the cover of the GARD LS4 or LT4 barrier. The flashing light board has a built-in antenna, which you connect to the control board with an RG58 cable no longer than 10 m.

Wiring according to the Came instructions

  • GARD LT4 barrier – flashing light terminals 24-W to control board terminals 10-E/E1, for example in the LT4 complete kit.
  • GARD LS4 barrier – terminals 24-R-G to terminals +-R-G, for example in the LS4 complete kit.
  • VER PLUS operators – terminals 24-R-G to 10-E-5, for example on the Came VER10 PLUS. With function F18 you select traffic light mode (F18 = 3) or GGR (F18 = 4). The control board firmware must be version 1.8.0 or later.

What to bear in mind during installation

  • Cable – power supply with a 2 × 0.5 mm² cable, no more than 50 m from the control board.
  • Jumper W – position F means flashing, position S steady light, depending on the supply from the control board.
  • Sealing – before closing the cover, seal the cable entries against moisture and insects.

Send questions about compatibility to eshop@saver.sk.

Specifications

Power supply24 V AC/DC
Dimensions120 × 100 × 26 mm
Weight300 g
Protection ratingIP54
Max. power consumption3 W
Operating temperature-20 až +55 °C
CompatibilityCAME GARD LS4/LT4, VER PLUS (from version 1.8.0)

Similar products

Back to top