Nice Toona 5024 operator kit for double-leaf gates, up to 10 m, 24 V

Nice Toona 5024 is a kit of two linear operators for double swing gates with a total width of up to 10 m, i.e. with leaves up to 5 m. The 24 V DC motors handle 95 cycles per hour at nominal force, so they are also suitable for entrances with frequent opening. The operator stroke is 540 mm.

Features

• protection when the leaf hits an obstacle and slowdown before the end positions,
• the mechanical limit switch on the operator sets the open position, so no ground stop is needed for opening,
• in the event of a power cut, release the operator with the key and open the leaf by hand,
• Nice hand transmitters with O-Code coding on 433.92 MHz.

Things to consider before installation

• Stops – in the closed position, the gate must have a centre stop.
• Leaf weight – the permitted weight decreases with leaf length; compare it with the graph in the instructions before installation.
• Installation dimensions – dimensions A and B should be similar. The rear bracket measures 150 mm; for outward opening use the PLA6 bracket.
• Environment – protection rating IP44, operation at −20 to +50 °C.

For gates up to 6 m, the Toona 4024 is sufficient. The replacement board is the Nice MCA1R10. We install the operator in the Košice and Prešov regions; more on the page.