Came RSE card for extended functions

The Came RSE card adds further functions to the control board of a Came operator. It is most often used to link two operators that are to work together, for example two opposing sliding gates or two barriers. The card also enables control via the Came Remote Protocol.

Which operators

For Came control boards with an RSE connector, for example the ZN7 in BXV operators, the ZN8 in BKV operators or the ZBX7N in BX-74 and BX-78 operators. With other boards, check the RSE connector in their instructions.

Master/Slave mode

1. Switch off the power supply and insert the card into the RSE connector in both control boards.
2. Connect the terminals intended for joint operation according to the control board instructions.
3. Set one board as Master and the other as Slave; the procedure is in the control board instructions.

The card may also be needed to connect the Came Key module to boards without their own connector. An RSE card is also included with the Came GSM Gateway, which connects the operator to Came Connect via the mobile network. You can add a time schedule with the Came CLOCK module. A suitable operator is, for example, the Came BXV06AGS. You can order wiring through our in the Košice and Prešov regions; send any questions to eshop@saver.sk.