RollingCenter kit for cantilever sliding gates, 94 × 85 mm profile, clear passage up to 6 m

The RollingCenter kit is used to build a cantilever sliding gate with a clear passage of up to 6 m. The gate runs on two carriages anchored next to the opening, so the passage remains free of any track. The parts are galvanised.

Parts of the manufacturer's assembly

• CA 4 RS carriage – 2 pieces, load-bearing carriage with 8 wheels.
• GIPI 5 RG/Z C-profile – 94 × 85 mm profile, length according to the gate. A shorter piece is the 3 m C-profile.
• 41 P support wheel and 50 P stop – 2 pieces each. You can also buy the 41 P support wheel separately.
• Top guide – 4RM P plate with rollers.

Things to bear in mind before ordering

• Gate length – the counterbalance tail is 30 % of the clear passage; with a clear passage of 6 m, this is 1.8 m.
• Foundation – prepare the concrete foundation for the carriages and the cable routes according to the enclosed site preparation requirements.
• Lighter gate – for a clear passage of up to 4 m and 450 kg, there is the kit with CA 4 RPS carriages.

We will confirm the exact kit contents and profile length at eshop@saver.sk. You will find an operator for the gate in .