RollingCenter C-profile for cantilever sliding gates, galvanised, 94 × 85 mm, 6 m

The C-profile is welded or bolted to the bottom of the frame of a cantilever sliding gate. The load-bearing carriages anchored beside the opening run inside the profile, so the opening remains free of any track. The profile is galvanised.

Specifications according to the RollingCenter catalogue

• Profile – 94 × 85 mm, wall thickness 5 mm.
• Length – 6 m. The shorter piece is GIPI 5 RGZ 3 (3 m).
• Load capacity – with 2 CA 4 RS carriages, a gate up to 600 kg and an opening up to 8 m.

What else you need

• Carriages – 2 pieces of CA 4 RS.
• Profile ends – 41 P support wheel, 50 P stop and 153/P end cap.
• Top guide – 4RM P plate.

Things to consider when ordering

The profile must be as long as the whole gate including the counterbalance (30 % of the opening). With an 8 m opening, the gate is 11.4 m long, so combine 6 m and 3 m pieces. The complete assembly is included in the RollingCenter kit for passage up to 6 m. We are happy to help you choose at eshop@saver.sk.