RollingCenter wheel with bracket inside the frame, C45, 2 bearings, V groove, Ø 120 × 24 mm

The 1224PSV wheel carries a tracked sliding gate. It is made of C45 steel, has two bearings and sits in a bracket that is inserted into the bottom profile of the gate. The wheel is thus partly recessed in the frame. The two bearings spread the load, so it carries more than a wheel of the same diameter with one bearing. According to the manufacturer's catalogue, the V groove is intended for the RollingCenter ANGULA track.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 120 mm, width 24 mm, V groove with 96° angle.
• Bracket – length 185 mm, 2 holes Ø 9 mm at 151 mm centres.
• Load capacity – 430 kg per wheel.
• Finish – galvanised steel.

Things to consider when choosing

A gate needs at least 2 wheels and their total load capacity must exceed the weight of the gate. The smaller wheel is 1022PSV. The wheel with 2 bearings in a closed bracket is 1030PCV (350 kg), without a bracket 1220V (1 bearing, 270 kg). A suitable track is the 3 m V track. We are happy to advise at eshop@saver.sk.