RollingCenter wheel with bracket inside the frame, 1 bearing, V groove, Ø 90 mm

The 920PSV wheel carries a tracked sliding gate. It is made of C45 steel, has one bearing and sits in a bracket that is inserted into the bottom profile of the gate. The wheel is thus partly recessed in the frame. According to the manufacturer's catalogue, the V groove is designed for the RollingCenter ANGULA track.

Specifications according to the RollingCenter catalogue

• Wheel – diameter 90 mm, width 20 mm, V groove with a 96° angle.
• Bracket – length 140 mm, 2 holes Ø 9 mm at 117 mm centres.
• Load capacity – 220 kg per wheel.
• Finish – galvanised steel.

Things to consider when choosing

A gate needs at least 2 wheels, and their total load capacity must be higher than the weight of the gate. A smaller one is the 820PSV. The same diameter with 2 bearings is the 922PSV (300 kg), without a bracket the 920V. 920PSV wheels are also included in the kit for tracked gates in the variant for gates up to 440 kg. A suitable track is the V track 3 m. We can advise at eshop@saver.sk.