Came CGZP toothed rack, plastic-coated, steel core, module 4, 20 × 27 mm

The toothed rack is fixed to the sliding gate along its entire length. The operator's gear wheel engages with the rack and so moves the gate. The Came CGZP rack has a nylon surface with a steel core and a tooth module of 4, just like the Came V6 rack. Both have the same cross-section, so you can combine them on one gate.

Which operators it works with

• Came BX – for example the Came BXV10AGS for gates up to 1,000 kg.
• Came BK – for gates up to 1,000 kg. For a heavier gate, choose the 30 × 12 steel rack for up to 2,200 kg.

Installation

1. Release the operator and place the rack on the gear wheel.
2. Fix the rack to the gate along its entire length. Additional screws with washers are included in the rack fixing kit.
3. Support the joint between two pieces with a short piece of rack and secure it with two clamps.
4. Set the clearance between the wheel and the rack using the operator's feet, and only then fix the operator firmly.

The BX/BK end stops are fixed to the rack. For a gate on a slope, add the BSF-M hydraulic brake, which engages with a module 4 rack. We install gates with operators in the Košice and Prešov regions; more on the page.