Hörmann Portronic D 5000 / D 2500 control unit, with 433 MHz receiver

The control board controls the motors of a Hörmann Portronic D operator on both single and double swing gates. It has an integrated 433 MHz radio receiver for hand transmitters with changeable code. Use it as a replacement for a damaged board.

Features

• Settings – 1- or 2-leaf operation, leaf offset, automatic closing and slow travel are set with DIL switches.
• Force limit – in both directions; the forces are learned while the gate runs.
• Receiver – channels 1 and 2; on a 2-leaf gate, channel 1 for both leaves and channel 2 for leaf A.

Learning a hand transmitter

1. Press the P button on the board 1× for channel 1 or 2× for channel 2.
2. Hold the transmitter button until the red LED starts flashing quickly.
3. Release it and press it again within 15 seconds. When the LED stays lit, the transmitter has been learned.

Things to consider when replacing

Do not handle the board while it is live. After replacement, relearn the end positions and forces according to the instructions. For leaves from 1.5 m, the manufacturer recommends an electric lock. For EcoStar Portronic D 5000 and D 2500 operators we also offer the motor control unit. Before ordering, send us a photo of the operator data label at eshop@saver.sk. We carry out replacements in the Košice and Prešov regions as part of our .