Came ZBX7N control unit, new type

Came ZBX7N is a control board for Came BX-74 and BX-78 sliding gate operators. Use it when the original electronics fail or as a replacement for the old ZBX74 type with DIL switches. The new board is set up via the programming menu. The motor runs on 230 V AC, so the operator is not suitable for heavy-duty use.

Replacing the old ZBX74-78

• FA-FC-F contacts – on the old board they are in reverse order; take care when rewiring.
• Function F11 (encoder) – ON from the factory, meaning the encoder is off. If the operator has an encoder, select OFF.
• Function A1 (motor type) – select 1 for the BX-74 or 2 for the BX-78, then set the travel with function A3.
• Function F54 (opening direction) – set the correct direction, otherwise the photocells will not work properly.

Programming a transmitter

1. Enter menu U1 and select value 2 (OPEN – STOP – CLOSE).
2. Press ENTER; the user's sequence number is displayed.
3. Hold the transmitter button until STO (stored) is displayed.

Read the enclosed instructions before wiring and do not connect the board while it is live. Send compatibility questions to eshop@saver.sk. The plastic board holder for operators made up to 2018 is the RIBX010. We carry out the replacement in the Košice and Prešov regions as part of our . A new operator can be found in the Came BX-74 and Came BX-78 kits.