Hörmann HOR1 optional relay

Hörmann HOR1 is an add-on relay for SupraMatic series 2 and 3 operators. Through it the operator switches on the garage lighting or a signal light, or reports that the door is closed. The relay plugs into the BUS socket in the operator. It has an IP44 housing and measures 110 × 45 × 40 mm.

Functions

• Garage lighting – the light switches on when the door moves.
• Signal light – flashes or stays lit, depending on the operator settings.
• Position feedback – the contact reports the door closed end position. In this mode the relay does not control the signal light.
• Switching capacity – max. 30 V DC / 2.5 A or 250 V AC / 500 W (resistive load).

HOR1 or HOR1-HCP

Both relays do the same job; they differ in the operator bus. HOR1 is for older SupraMatic series 2 and 3 operators with a BUS. Series 4 operators (SupraMatic 4, ProMatic 4) have an HCP bus and need the HOR1-HCP. The relays are not interchangeable. If the BUS socket in the operator is already in use, connect the relay together with another device via the Hörmann AS 1 Y-connector. More add-ons can be found in the Operator accessories category.

If you are not sure which series your operator is, send a photo of the rating plate to eshop@saver.sk.