Came TCH-4024 remote control, 4-channel, fixed code, 40.685 MHz

The Came TCH-4024 is a TOUCH series transmitter for Came operators and automation systems with a receiver on the 40.685 MHz frequency. It has two buttons, T1 and T2, and a TS toggle button. With the red LED lit, you control channels CH1 and CH2; after pressing TS, the blue LED lights up and the same buttons control CH3 and CH4. In total, you can control up to four devices. It transmits a 24-bit fixed code with quartz control.

Copying the code from an old transmitter

1. On the NEW transmitter, press two buttons at the same time until the LED starts flashing rapidly.
2. Press the button you want to code. The LED lights up steadily.
3. Within 10 seconds, hold the OLD transmitter next to it and press and hold the button you want to copy. When the LED of the new transmitter flashes three times, the code has been transferred.

For channels CH3 and CH4, repeat the procedure after pressing the TS button. For a new installation without an old transmitter, follow the instructions for the control board.

What to bear in mind

• Frequency – before ordering, check that your receiver operates on 40.685 MHz.
• Battery – 12 V type 23A, included.

For a Came 433.92 MHz fixed-code receiver, choose for example the Came TOP44FGN; you will find others in the hand transmitters category. Send questions to eshop@saver.sk.