Came RIOLUX RIOLX8WS warning light, wireless, 868 MHz
- Battery-powered Came RIO-LUX wireless LED warning flashing light, no cabling
- Radio range 30 m, 2 CR123A lithium batteries, protection rating IP54
- Communication with the operator requires the Came RIO-CONN card
Call us, we will help you choose the right part or accessory.
+421 903 628 111Mon–Fri 8–16, also WhatsApp and Viber-
Radio frequency868.95 MHz
-
Power supply3 V DC (2 lítiové batérie CR123A)
-
Dimensions170 × 130 × 76 mm
-
Weight500 g
-
MaterialABS polycarbonate
-
Protection ratingIP54
-
Standby consumption80 µA
-
Operating temperature-20 až +55 °C
Description
Came RIO-LUX is a warning flashing light that flashes while the gate is moving. It communicates with the control unit by radio and is powered by batteries, so you do not need to run a cable to it. It suits places where it is difficult to get a cable to the post. Battery life is approximately 24 months at an average of 20 cycles per day.
What you need
- Control card – Came RIO-CONN in the operator's control unit.
- Wall mounting – for side mounting, buy the Came KIAROS bracket.
Pairing
- Remove the batteries from all wireless devices and insert them only into the flashing light. LEDs CH1 and CH2 flash red.
- On the flashing light, press the T1 button for 1 second; the CH1 and CH2 LEDs start flashing red alternately.
- On the RIO-CONN card, press the PROG button for 1 second. The CH1 LED on the flashing light flashes blue once and goes out; the flashing light is paired.
Reset: hold the T2 button for about 10 seconds. Do not change the position of the antenna on the board. The wireless photocells are Came RIO-CELL. Please send questions to eshop@saver.sk.
Specifications
| Radio frequency | 868.95 MHz |
| Power supply | 3 V DC (2 lítiové batérie CR123A) |
| Dimensions | 170 × 130 × 76 mm |
| Weight | 500 g |
| Material | ABS polycarbonate |
| Protection rating | IP54 |
| Standby consumption | 80 µA |
| Operating temperature | -20 až +55 °C |
