Umakov kit for cantilever sliding gates, passage up to 4 m, galvanised, profile with holes 70 × 60 mm

The kit contains the bottom hardware for building a cantilever sliding gate. A cantilever gate does not run on a track; it runs on roller carriages anchored next to the opening. The opening thus stays free of any track and the gate works even in snow. The load-bearing profile has mounting holes, so you can bolt it to the gate frame without welding, or weld it on. All parts are hot-dip galvanised.

Kit contents

• Load-bearing profile with holes 70 × 60 × 3.5 mm – 1 piece, 6 m, 11 × 22 mm holes at 400 mm spacing.
• Roller carriages – 2 pieces for the 70 × 60 mm profile.
• End roller with cover – 1 piece.
• Bottom lead-in – 1 piece.
• Profile end cap – 1 piece.

Things to consider before ordering

• Gate weight – the manufacturer specifies the kit for gates up to 4 m and 200 kg.
• Carriage anchoring – into a concrete foundation, for example with the M16 × 250 anchoring kit (1 kit per carriage); not included in the kit.
• Top guide – holds the gate upright; buy it separately.
• Profile without holes – if you weld the profile to the frame, the kit with a profile without holes is sufficient.

We can add to or modify the kit on request – write to us at eshop@saver.sk. You will find an operator for the gate among our .