Umakov ECO bottom guide kit for cantilever sliding gates, opening up to 4 m, 70 × 60 mm profile, galvanised

The ECO kit contains the bottom guide hardware of a cantilever sliding gate without the load-bearing profile. It is designed for the Umakov H/02 70 × 60 mm profile, which you order separately or already have on the gate. A cantilever gate does not run on a track; it runs on carriages anchored beside the opening, so the passage stays clear even in snow. All parts are hot-dip galvanised.

Kit contents

• H/34B-4 carriages – 2 pieces with four wheels each, anchored in the foundation.
• H/14N end roller – fitted to the end of the profile, it runs onto the bottom catcher when closing.
• Bottom catcher H/15P-70 – mounted on the closing post, it catches and centres the gate.
• H/40 end cap – closes the profile at the leading end of the gate.

Good to know

• Profile – the kit does not include the profile; use the 70 × 60 × 3.5 mm profile, 6 m. The complete kit with profile is the kit up to 4 m.
• Weight and opening – the manufacturer specifies gates up to 200 kg and openings up to 4 m.
• Anchoring – into a concrete foundation, for example the M16 × 250 anchor kit (1 kit per carriage).
• Top guide – keeps the gate upright, for example the covered top guide with 2 rollers.

We are happy to advise at eshop@saver.sk.