Came EDGF35R1 sensitive safety edge for barrier booms, 8K2, 3.5 m

The Came EDGF35R1 is a sensitive safety edge from the EDG F series, which Came designates for barrier booms. It is fitted to the bottom edge of the boom. If the boom hits an obstacle while closing, the edge changes its resistance and the barrier reopens. The edge is resistive with 8.2 kΩ, so the control unit also monitors for a broken or short-circuited cable.

Specifications

• Length – 3,500 mm, fixed. Came does not supply F edges for cutting to length; choose the length to suit the boom.
• Profile – EPDM rubber 17 × 27 mm, height 27 mm.
• Protection rating – IP67.
• Type – R1, 8K2 resistive edge.

Connection to the GARD LT4 barrier

• Directly to the control unit – according to the LT4 manual, 8K2 sensitive edges connect to input CX, CY or CZ, which you set to function R7 in the menu (reopening during closing).
• With a higher safety category – via the separate Came ECN3F242 evaluation unit (cat. 3, PL e).
• Boom – the LT4 barrier uses the G0401 rectangular boom, 60 × 40 mm, 4.2 m long. With a 4.2 m boom, the 3.5 m edge covers most of the passage.

If you are not sure about the wiring or length, write to us at eshop@saver.sk.