Came UNIPARK ML parking barrier, automatic

The Came UNIPARK ML parking barrier protects a reserved parking space or private area from other cars. It differs from the UNIPARK M by its wider hoop. You raise and lower it with a hand transmitter without leaving the car; raising or lowering takes about 10 seconds.

In the box

• Base plate with motor – UNIPARK 001UNIP with irreversible 24 V DC gearmotor and hex release key.
• Hoop – Large ARK 2 hoop, 800 × 522 mm, for parking spaces up to 2.45 m wide.
• Control board – ZL22N with transformer in an ABS enclosure.

Up to 4 parking spaces from one control board

• Additional barriers – connect up to 3 additional UNIPARK M or additional UNIPARK ML barriers to the ZL22N; the LM22N expansion module is in their box.
• Remote control – one AF43S receiver card in the control board serves all barriers. Each barrier has its own code and button: the 2-channel TOP-432EE controls 2 barriers, the 4-channel TOP44FGN all 4. Each barrier stores up to 50 transmitters.
• Several barriers at once – raise them with a wired command, for example a key switch, a push button or a GSM module dial-to-open.
• Power cut – for backup batteries add the LB22 board; otherwise release the barrier with the hex key.

Good to know before installation

• Safety – the barrier has no photocells. Operate it only when you can see it directly.
• Foundation – the manufacturer recommends a 400 × 600 mm concrete base, 100 mm deep, with a cable conduit.
• Other version – for a smaller space choose the UNIPARK M; without a motor there is the mechanical UNIPARK M.

We install in the Košice and Prešov regions; send enquiries to saver@saver.sk. We are happy to advise at eshop@saver.sk.