Sectional garage doors 0 products

Hörmann RenoMatic 2026 sectional garage doors with steel panels filled with 42 mm polyurethane foam, with a Planar, Woodgrain or DecoColor surface, in widths of 2,500, 3,000 and 5,000 mm, without an operator or with a DuraMatic, ProMatic or SupraMatic E operator. We supply made-to-measure doors from the entire Hörmann range, and in the Košice and Prešov regions we also provide the site survey and installation.

More about this category

E-Shop

Looking for a made-to-measure door?

Configure it online and we will send you a quote.

Other models in the official Hörmann configurator More options

Configure a door All doors in stock (3)

No products found

If filters are on, remove one of them. Or call us, we can also help with goods not listed in the shop.

Go to the home page +421 903 628 111

How to choose a sectional door

A sectional door consists of panels that slide vertically upwards when opening and are stowed under the ceiling. It can be fitted into almost any garage opening, and you can park right up to the door in front of the garage. Four things decide the choice:

Opening size – RenoMatic doors are supplied in widths of 2,500, 3,000 or 5,000 mm and heights of 2,125 or 2,250 mm for each width. Hörmann makes other sizes to measure.
Surface and ribbing – smooth Planar surface, Woodgrain wood texture or DecoColor wood decor. M-ribbed panels have one rib in the middle, L-ribbed panels have no rib.
Thermal insulation – the double-skin RenoMatic panels are filled with polyurethane foam 42 mm thick, so the door is also suitable for a garage attached to the house.
Operator – the opening speed and suitability for the door width differ by operator. The door can also be ordered without an operator.

RenoMatic doors in our range

Door	Surface	Ribbing	Colours and decors	Insulation
RenoMatic Planar	smooth ultra-matt Planar Matt deluxe	M or L	CH 9016 white, CH 9006 white aluminium, CH 9007 grey aluminium, CH 703 anthracite metallic, CH 7016 anthracite grey, CH 9005 black, CH 8028 terracotta brown	42 mm, polyurethane foam
RenoMatic Woodgrain	saw-cut wood texture	M	RAL 9016 white, RAL 9006 white aluminium, RAL 9007 grey aluminium, CH 703 anthracite metallic, RAL 7016 anthracite grey, RAL 9005 black, RAL 8028 terracotta brown	42 mm, polyurethane foam
RenoMatic DecoColor	wood decor	M	Golden Oak, Dark Oak, Night Oak	42 mm, polyurethane foam

Operators for the RenoMatic door

Operator	Opening speed	Door width	Note
DuraMatic	up to 16 cm/s	2,500 and 3,000 mm	24 V DC motor
ProMatic series 4	up to 20 cm/s	2,500 and 3,000 mm	brighter lighting
SupraMatic E series 4	up to 25 cm/s	2,500, 3,000 and 5,000 mm	stainless steel cover, the only operator for a width of 5,000 mm

Each operator is supplied with an FS 10 guide rail and an HSE 4 BS hand transmitter with the BiSecur 868 MHz system and 128-bit rolling code. The pulling force of the operators is 600 to 650 N depending on the type. Other operators can be found in the Garage door operators category.

Made-to-measure doors

If you need a different size, style or colour, Hörmann will make the door to measure. You can choose double-skin, thermally broken LPU 67 Thermo panels 67 mm thick, double-skin LPU 42 panels 42 mm thick, or the single-skin LTE 42 door for detached garages with no insulation requirements. The doors are made with Woodgrain, Planar, Silkgrain, Sandgrain, Decograin and Duragrain surfaces with dozens of decors. Hörmann doors are tested and certified to the European standard EN 13241, and the manufacturer offers a warranty of up to 10 years on sectional doors.

Matching doors and accessories

Thermo65 Matt deluxe front doors in the Front doors category are colour-matched to the Planar surface, and for most made-to-measure styles we can also supply side doors – more on the page. A handle set with lock in plastic, aluminium or stainless steel is chosen separately for the door. The Garage door accessories category also contains the NET 2 and NET 3 emergency release, floor seal, ThermoFrame additional seal, ventilation grilles and RC 2 burglar-resistant fittings.

Site survey and installation in the Košice and Prešov regions

In the Košice and Prešov regions we provide the site survey, delivery and installation of the door. The process: a preliminary quote within 24 hours, a free site survey once you accept it, and installation by our own SAVER team. More on the page. You can put together a RenoMatic door in the configurator; enquiries for made-to-measure doors are welcome via a quote request.

Frequently asked questions

Are RenoMatic doors in stock?

Doors we have in stock are marked “In stock – available immediately” in the selection. Other combinations of size, colour and operator are made to order by Hörmann.

Which operator should I choose for a 5,000 mm wide door?

For a width of 5,000 mm the SupraMatic E series 4 operator is intended for the RenoMatic door. DuraMatic and ProMatic series 4 operators are intended for widths of 2,500 and 3,000 mm.

What is the difference between M-ribbed and L-ribbed?

M-ribbed has one horizontal rib in the middle of each panel, L-ribbed has smooth panels without ribs. L-ribbed is available with the Planar surface.

Is a remote control included with the operator?

Yes, each operator is supplied with an HSE 4 BS hand transmitter with the BiSecur 868 MHz system. Additional transmitters, keypads and push buttons are among the accessories.

Can I order the door without an operator?

Yes, a door without an operator is opened by hand and the operator can also be added later. It is advisable to choose the handle set with lock together with the door.

Do you install outside Košice?

We provide installation in the Košice and Prešov regions. We deliver goods throughout Slovakia and the Czech Republic.

Operator by gate type

Operator accessories

Spare parts

Cantilever gates

Track gates

Swing gates

Other